Standard Roofing Batten and other treated roofing timbers

• SR Timber Tanalised STANDARD roof battens are a basic version of the traditional roof batten that has been imported into the UK roofing and building sector for many years. The range also includes other key roofing and timber products
• SR Timber Tanalised STANDARD roofing timber products are produced in carefully selected sawmills in the Baltics and Scandinavia, then imported as finished products to our timber terminal on the Humber
• SR Timber Tanalised STANDARD roofing battens are available in a 19mm x 38mm profile and lengths from 3.0m up to 5.4m, in 300mm increments
• Other SR Timber Tanalised STANDARD roofing timbers are available - see list below
• Produced from imported spruce and fir (Whitewood) Abies Alba/Picea abies - WPCA or pine (Redwood) Pinus sylvestris - PNSY or combined/mixed species - WPPA, all supplied from either FSC or PEFC fully certified resources
• The majority of SR Timber Tanalised STANDARD products are dried and should not exceed 22% moisture content
• High pressure Tanalith E preservative treated to BS:8417:2003 with our standard 60 year lifetime warranty against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings)
• Preservative treatment produces a distinctive pale green colouration that does not hide any potential defects within the timber products

Other SR Timber Tanalised STANDARD roofing timbers available

Drip Batten
12 x 38mm
Lead Roll (Mopstick)
50 x 50mm
Arris Rail
47 x 50mm       47 x 75mm
47 x 100mm     47 x 125mm
47 x 150mm     47 x 175mm
47 x 200mm     47 x 225mm
50 x 50mm       75 x 75mm
Counterbatten
10 x 38mm       38 x 38mm
38 x 50mm       50 x 50mm
75 x 70mm       75 x 50mm
75 x 75mm       75 x 100mm
75 x 125mm     75 x 175mm
75 x 200mm     75 x 225mm
Western Red Cedar Blue Label, XXXXX
Cedar Shingles
Cedar Ridges
Silicone-Bronze Nails